Guillotine shears
HSK-guillotine shears are stand-alone, motor-driven machines with electrical control, mostly used for cutting or trimming sheet metal. It is also possible to cut other various materials like plastics, CFRP/GFRP, fleece material, foam or precious metals, mainly in form of sheets, but also formed work pieces like deep-drawing parts and profiled sheet metals, or directly from a coil.

HSK/L 530 x 2 mm
- flange motor with brake 2,8 kW
- cycle time approx. 0,8 s
- cutting angle 1°
Features
- special table stop 3000mm
with measuring tape - mechanical stroke counter
- T-slot in front ot the table

HSK/L 730 x 2,5 mm
- bevel gear motor 3,0 kW
- cycle time approx. 1,1 s
- cutting angle 1,68°
Features
- pneumatic hold down
- cut illumination
- manual oil central lubrication
- triple trace safety light barrier
and safety guard shortened - sidewise table stop shortened
- without table extensions

HSK/L 1030 x 2 mm
- bevel gear motor 2,2 kW
- cycle time approx. 1,1 s
- cutting angle 1,2°
Features
- pneumatic hold down
- cut illumination
- special sidewise table stop
- additional table extension
- manual back stop operated
from the front - foldaway safety guard

HSK/L 1030 x 2 mm
- bevel gear motor 3 kW
- cycle time approx. 0,9 s
- cutting angle 2,5°
Features
- 2-hand cut release
- laser marker of cutting edge
- shear table with Teflon-cover
- digital indicator for back stop
- pneumatic Teflon-tilting table
with pneumatically actuated
stop bar

HSK/L 1280 x 1,75 mm
- bevel gear motor 4,0 kW
- cycle time approx. 0,9 s
- cutting angle 1,63°
Features
- pneumatic hold down
- cut illumination
- special sidewise table stop
- motor-driven back stop with
„return to sender“-operation - oil spray lubrication on the blades
- additional machine lamp

HSK/L 1280 x 1,75 mm
- bevel gear motor 4,0 kW
- cycle time approx. 0,9 s
- cutting angle 1°
Features
- Siemens control S7-1500
with 9“ comfort touch panel - exact positioning in TDC
- pneumatic hold down
- motor-driven back stop with
„return to sender“-operation - oil spray lubrication on the blades

HSK/L 2030 x 1 mm
- bevel gear motor 3,0 kW
- cycle time approx. 1,1 s
- cutting angle 1,3°
Features
- pneumatic hold down
- special sidewise table stop
with digital indicator - motor-driven back stop
- pneumatic sheet support

HSK/G 1030 x 3 mm
- bevel gear motor 4,0 kW
- cycle time approx. 1,2 s
- cutting angle 2,0°
Features
- hold down mounted close
to the cutting area - manual oil central lubrication
- T-slot at the front side of the
table for sidewise adjustment
of the table stop and the table
extensions

HSK/G 1130 x 1,5 mm
- bevel gear motor 4,0 kW
- cycle time approx. 1,2 s
- cutting angle 1,33°
- opening of hold down 6 mm
Features
- hold down, table plate and
blades manufactured according
to the sheet metal geometry - manual oil central lubrication

HSK/G 1230 x 2 mm
- bevel gear motor 4,0 kW
- cycle time approx. 1,2 s
- cutting angle 1,33°
- opening of hold down 18 mm
Features
- hold down, table plate and
blades manufactured according
to the geometryof the sheet metal - designed with quick exchange
frame and crane hook - automatic oil central lubrication

HSK/G 2030 x 2 mm
- bevel gear motor 4,0 kW
- cycle time approx. 1,2 s
- cutting angle 1,6°
Features
- pneumatic hold down
- motor-driven back stop
- T-slot at the front side of the
table for sidewise adjustment
of the table stop and the table
extensions - individual safety concept

HSK/W 530 x 1,5 mm
- flange motor 2,2 kW with
clutch-brake-combination - cycle time approx. 0,8 s
- cutting angle 1,0°
Features
- pneumatic hold down
- manual oil central lubrication
- hard metal blades
- motor-driven front stop
- plastic plate mounted on table
- precise wedge shoes

HSK/W 530 x 2,0 mm
- flange motor 2,2 kW with
clutch-brake-combination - cycle time approx. 0,8 s
- cutting angle 1,25°
Features
- manual oil central lubrication
- cut illumination

HSK/W 1280 x 2,25 mm
- drive power 2,2 kW
- cycle time approx. 0,8 s
- cutting angle 1,63°
Features
- T-slot at the table front
- two T-slots in the table
- special table extensions
- special table stop
- motor-driven back stop
- exhaustion prepared
- base frame to raise table

HSK/W 1280 x 2,25 mm
- bevel gear motor 2,2 kW with
clutch-brake-combination - cycle time approx. 0,8 s
- cutting angle 1,63°
Features
- manual oil central lubrication
- manual back stop operated
from the front side - gravity chute to the front side
- back stop with three
selectable contacts fur cut release

HSK/W 1330 x 1,75 mm
- flange motor 2,2 kW with
clutch-brake-combination - cycle time approx. 0,8 s
- cutting angle 1,6°
Feastures
- manual oil central lubrication
- motor-driven feeder with fully
automatic positioning - coil support in front of the shear

HSK/N 530 x 4 mm
- bevel gear motor 5,5 kW
- cylce time approx. 1,6 s
- cutting angle 1,35°
Features
- pneumatic hold down
- cut illumination
- manual oil central lubrication
- motor-driven back stop
- shear table, table stop and
table extensions covered with
plastic plates and brushes

HSK/N 1030 x 1,25 mm
- bevel gear motor 5,5 kW
- cycle time approx. 1,6 s
- cutting angle 1,5°
- opening of hold down 6 mm
Features
- suitable for very high profiles
TP 100/275 and TP 135/310 - hold down, table plate and
blades manufactured according
to the sheet metal geometry - manual oil central lubrication

HSK/N 1030 x 4,0 mm
- bevel gear motor 5,5 kW
- cycle time approx. 1,6 s
- cutting angle 2°
Features
- manual oil central
lubrication - vibration damped
wedge shoes
(not shown in picture)

HSK/N 1030 x 4,0 mm
- bevel gear motor 5,5 kW
- cycle time approx. 1,6 s
- cutting angle 2°
Features
- cut illumination
- manual oil central lubrication
- motor-driven back stop
with chute to the operator - complete housing with
sidewise doors at the back - table stop/ extensions shortened

HSK/N 1030 x 4,0 mm
- bevel gear motor 5,5 kW
- cycle time approx. 1,6 s
- cutting angle 2°
Features
- pneumatic hold down
- motor-driven back stop
800 mm - shear table covered with
plastic plates and brushes

HSK/N 1030 x 4,0 mm
- flange motor 3 kW with
clutch-brake-combination - cycle time approx. 0,8 s
- cutting angle 1,2°
Features
- motor-driven front stop
- motor-driven back stop
- pneumatic sheet support
for thin sheet metal

HSK/N 1530 x 3 mm
- conventional motor 4 kW
- cycle time approx. 0,8 s
- cutting angle 1,4°
Features
- swivel operating unit
- special table stop with
T-Slot 1600 mm - 4 contact stops
- motor-driven back stop with
ball thread spindles 600 mm - cut gap adjustment by levers
and locking bolts

HSK/N 1630 x 2,5 mm
- bevel gear motor 5,5 kW
- cycle time approx. 1,1 s
- cutting angle 1,98°
Features
- hold down prepared for
bigger opening - manual back stop 600mm
- safety guards with free
space to the ground

HSK/N 2030 x 3,25 mm
- bevel gear motor 5,5 kW
- cycle time approx. 1,7 s
- cutting angle 2°
Features
- manual oil central
lubrication - cut illumination
- manual back stop

HSK/N 2530 x 2,5 mm
- bevel gear motor 5,5 kW
- cycle time approx. 1,7 s
- cutting angle 1,68°
Features
- special table stop with
T-Slot 1250 mm - shear table covered with
plastic plates - tilting table with rolls
- cut illumination
- manual oil central lubrication

HSK/N 3030 x 1 mm
- bevel gear motor 5,5 kW
- cycle time approx. 1,4 s
- cutting angle 1,45°
Features
- motor-driven back stop
- pneumatic hold down
- side stop 1000mm

HSK/Sv 530 x 13 mm
- conventional motor 4 kW
with clutch-brake-combination - cycle time approx. 1,0 s
- cutting angle 1,77°
Features
- cut illumination
- cut gap adjustment by levers
and locking bolts - manual oil central lubrication

HSK/Sv 530 x 13 mm
- conventional motor 11 kW
with clutch-brake-combination - cycle time approx. 1,2 s
- cutting angle 3,13°
Features
- cut illumination
- cut gap adjustment by levers
and locking bolts - electronical digital display
- manual oil central lubrication

HSK/Sv 530 x 13 mm
- conventional motor 11 kW
with clutch-brake-combination - cycle time approx. 1,2 s
- cutting angle 3,13°
Features
- cut illumination with LED
- stainless steel drawer with
removal collection container
coverd with hard rubber at the
back side of the machine - table covered with stainless steel
- plexiglass above the hold down

HSK/S 830 x 4,5 mm
- bevel gear motor 11 kW
- cycle time approx. 1,8 s
- cutting angle 1,4°
Features
- cut gap adjustment by levers
and locking bolts - special stainless steel chute
to the front with removable
collection container - hold down very close to the cut
- foldaway finger protection

HSK/S 1030 x 7 mm
- conventional motor 11 kW
with clutch-brake-combination - cycle time approx. 1,1 s
- cutting angle 3,22°
Features
- motor-driven back stop
- table coverd with plastic
- manual operated front stop
with digital position display - motor-driven conveyor belt

HSK/Sv 1030 x 12 mm
- conventional motor 11 kW
with clutch-brake-combination - cycle time approx. 1,1 s
- cutting angle 3,22°
Features
- foldaway finger protection
- digital display for the back stop
- press safety valve
- manual oil central lubrication

HSK/Sv 1030 x 12 mm
- conventional motor 11 kW
with clutch-brake-combination - cycle time approx. 1,1 s
- cutting angle 3,22°
Features
- cut gap adjustment by levers
and locking bolts - foldaway finger protection
- manual oil central lubrication

HSK/Sv 1030 x 12 mm
- conventional motor 11 kW
with clutch-brake-combination - cycle time approx. 1,1 s
- cutting angle 3,22°
Features
- cut gap adjustment by levers
and locking bolts - foldaway finger protection
- special side stop with didital display
- cut illumination

HSK/Sv 1030 x 12 mm
- conventional motor 11 kW
with clutch-brake-combination - cycle time approx. 1,1 s
- cutting angle 3,22°
Features
- foldaway finger protection
- press safety valve
- manual oil central lubrication

HSK/Sv 1030 x 12 mm
- conventional motor 11 kW
with clutch-brake-combination - cycle time approx. 1,1 s
- cutting angle 3,22°
Features
- cut gap adjustment by levers
and locking bolts - foldaway finger protection
- manual oil central lubrication

HSK/Sv 1030 x 15 mm
- conventional motors 2x 11 kW
with clutch-brake-combination - cycle time approx. 1,2 s
- cutting angle 3,9°
Features
- motor-driven back stop with
digital position display - cut illumination with LED
- manual oil central lubrication

HSK/Sv 1030 x 15 mm
- conventional motors 2x 11 kW
with clutch-brake-combination - cycle time approx. 1,2 s
- cutting angle 3,9°
Features
- control panel
- cut illumination
- rear space protection
- manual oil central lubrication

HSK/S 1530 x 4,5 mm
- conventional motor 5,5 kW
with clutch-brake-combination - cycle time approx. 1,0 s
- cutting angle 2,1°
Features
- very narrow hold down acts
as stop - individual safety concept
- manual oil central lubrication
- baseframe for moving with forklift
or pallet truck with damping mats

HSK/S 2030 x 4 mm
- bevel gear motor 7,5 kW
- cycle time approx. 1,9 s
- cutting angle 2,15°
Features
- pneumatic hold down
- electronic digital dislpay
for the back stop - pneumatic sheet support
for thin sheet metal - manual oil central lubrication
- cut illumination

HSK/S 2330 x 6 mm ABS
- conventional motor 4,0 kW
with clutch-brake-combination - cycle time approx. 1,1 s
- cutting angle 1,93°
Features
- very narrow, staged and
pneumatically actuated
hold down acts as stop - individual safety concept
- manual oil central lubrication
- with additional signal light

HSK/S 2530 x 4 mm
- conventional motor 5,5 kW
with clutch-brake-combination - cycle time approx. 1,2 s
- cutting angle 1,66°
Features
- control S7-1200 with touchpanel
- motor-driven back stop with
ball thread spindles 350 mm - hold down broadened with
vulkollan - special pneumatic sheet support

HSK/S 2530 x 10 mm ABS
- conventional motor 5,5 kW
with clutch-brake-combination - cycle time approx. 1,1 s
- cutting angle 1,87°
Features
- very narrow hold down acts
as stop - individual safety concept
- manual oil central lubrication
- with additional signal light

HSK/S 3030 x 3 mm
- conventional motor 5,5 kW
with clutch-brake-combination - cycle time approx. 1,4 s
- cutting angle 1,9°
Features
- motor-driven back stop
800 mm with digital display -
tilting table with rolls - pneumatic hold down
- special side stop

HSK/S 4530 x 2 mm
- bevel gear motor 2x 5,5kW
- cycle time approx. 1,6 s
- cutting angle 1,73°
features
- pneumatic hold down
- table with ball casters
- motor-driven back stop
1000 mm with digital display - removal conveyor belt with
integrated sheet metal support
selection sheet metalwelding gusset platestype platesperforated plate + expanded metalcopper cathodesprecious metalscircuit boards plasticrubber + foam materialcorrugated cardboardtrimming of plastic partstrapezoidal sheetMagnetstreifen
Application areas
Our high quality HSK-eccentric shears are suitable for various industry sectors. The machines are often used in steel-service-centers or sign factories in shift work as producing shears, however, they are also used in mechanic workshops for sporadic cuts. The machine is cutomized according to the use of the shear and the best suitable drive unit is selected for the shear.
Standard equipment
- Vibration damping cast iron side frames
- Robust welded shear table with flat support surface
- Sidewise stop with measuring tape
- Table extensions with T-slots
- Spring-actuated hold down manufactured in one piece with glued-in rubber cord
- Steel blades manufactured in one piece using special blade steel with four cutting edges
- Manual cut gap adjustment by fine threaded spindles
- Manually-actuated back stop
- Safety guard and light barrier at the back side of the machine